[FSUG PD] Help HP - Deskjet 2510 Scanner

Giuseppe Tiozzo giuseppe.tiozzo a alice.it
Sab 23 Mar 2013 15:00:46 CET


Ciao Lorenzo, la stampante e lo scanner in questione a parere di un post 
datato di un mese circa, sempre in questa mailing list è supportato da 
linux. Appena recupero le mail le posto.
Si sono d'accordo con te che basta poco tradurre una paginetta oggi, 
anche se nell'informatica si usano dei termini che non vengono ben 
tradotti rimangono intuitivi.
Ma piacerebbe anche venirne fuori da questo mistero, quali moduli 
mancano ? E se proprio non si può far nulla, pazienza, quando sarà 
l'occasione di sostituire il colore che costa quasi come la stampante 
valuterò.
Grazie del sostegno ;-)

Il 23/03/2013 11:56, Lorenzo Scattolin ha scritto:
> Beh Giuseppe queste estensioni 
> <https://chrome.google.com/webstore/search-extensions/translate%20selection?utm_campaign=en&utm_source=en-et-na-us-oc-webstrapp&utm_medium=et> 
> sono molto utili e vengono incontro anche a chi non ha pratica con 
> l'inglese(a volte traducono un po' a brullo) io compreso.
> Non vuol esser un "impara l'inglese" solo una condivisione di un 
> problema già risolto.
> Ciao buona giornata
> Lorenzo
>
>
>
> Lorenzo S.
>
> /Inviato dalla Luna/
>
>
> 2013/3/23 Giuseppe Tiozzo <giuseppe.tiozzo a alice.it 
> <mailto:giuseppe.tiozzo a alice.it>>
>
>     Grazie Marco, ma guarda te che tiri bisogna fare per installare na
>     me..a de scanner.
>     fa differenza la dicitura "All - in - one" ?
>     I link non mi sono stati molto utili, non parlo l'inglese ;-(
>     Non vorrei buttar via la stampante, e nuova, se avete qualche
>     altra dritta son qua - Grazie
>
>
>     Il 22/03/2013 20:25, Marco Pantaleoni ha scritto:
>>
>>     Alla fine scrive che la stampante non è supportata.
>>     Comunque ci sono molti errori, per molti pacchetti mancanti e
>>     perché non fai parte del gruppo lp.
>>     Prova a risolverli e rifai il check.
>>     Prova anche a vedere se cercando con google il modello 03f0:ac11
>>     e hplip trovi qualcosa (il codice è quello del bus usb, che hai
>>     trovato con lsusb).
>>     Non riesco a dirti di più perché sto scrivendo dal telefono :)
>>
>>     Il giorno 22/mar/2013 19:09, "Giuseppe Tiozzo"
>>     <giuseppe.tiozzo a alice.it <mailto:giuseppe.tiozzo a alice.it>> ha
>>     scritto:
>>
>>         Il 22/03/2013 18:48, Andrea Brugiolo ha scritto:
>>
>>             On Fri, Mar 22, 2013 at 06:21:42PM +0100, Giuseppe Tiozzo
>>             wrote:
>>
>>                 Il 22/03/2013 18:15, Andrea Brugiolo ha scritto:
>>
>>                     On Fri, Mar 22, 2013 at 06:12:20PM +0100,
>>                     Giuseppe Tiozzo wrote:
>>
>>                         Il 22/03/2013 18:09, Andrea Brugiolo ha scritto:
>>
>>                             On Fri, Mar 22, 2013 at 05:54:34PM +0100,
>>                             Giuseppe Tiozzo wrote:
>>
>>                                 Salve a tutti, e da molto che provo,
>>                                 ma non riesco a far funzionare
>>                                 lo scanner nella stampante
>>                                 multifunzione HP - Deskjet 2510.
>>                                 installato hplip non va - configurata
>>                                 da cups si, ma solo la
>>                                 stampante non lo scanner.
>>                                 Info e dritte in merito - Grazie
>>
>>                                   ps: Xsane mi dice che non è
>>                                 disponibile alcun dispositivo
>>
>>                             Hai provato il programma di
>>                             configurazione hp-setup
>>
>>                             In Debian si trova nel package hplip
>>
>>                         si, al secondo passaggio mi dice : no devices
>>                         found
>>
>>                     La stampante e` collegata via USB o via rete?
>>
>>                 via USB
>>
>>             Volevo capire se questa stampante puo' richiedere
>>             configurazioni
>>             particolari (moduli) per l'usb su Linux ma il sito di
>>             OpenPrinting
>>             proprio adesso non si apre :(
>>             http://www.openprinting.org/printer_list.cgi
>>
>>             D'altra parte, se CUPS la vede non dovrebbe essere un
>>             problema per
>>             hplip!
>>
>>             Non so che dirti, al momento non ho una stampante HP su
>>             cui provare.
>>             Hai provato a dare il comando `hp-check -t'? Vedi
>>             http://forums.opensuse.org/english/get-technical-help-here/hardware/461109-hp-setup-does-not-find-usb-printer.html
>>
>>         risultato della schermata
>>         http://www.box.casalserugoedintorni.it/hp-check-t.png
>>         da terminale:
>>         ....... a .......-System-Product-Name:~$ hp-check -t
>>
>>         HP Linux Imaging and Printing System (ver. 3.12.2)
>>         Dependency/Version Check Utility ver. 14.3
>>
>>         Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
>>         This software comes with ABSOLUTELY NO WARRANTY.
>>         This is free software, and you are welcome to distribute it
>>         under certain conditions. See COPYING file for more details.
>>
>>         Note: hp-check can be run in three modes:
>>         1. Compile-time check mode (-c or --compile): Use this mode
>>         before compiling the HPLIP supplied tarball
>>         (.tar.gz or .run) to determine if the proper dependencies are
>>         installed to successfully compile HPLIP.
>>         2. Run-time check mode (-r or --run): Use this mode to
>>         determine if a distro supplied package (.deb, .rpm,
>>         etc) or an already built HPLIP supplied tarball has the
>>         proper dependencies installed to successfully run.
>>         3. Both compile- and run-time check mode (-b or --both)
>>         (Default): This mode will check both of the above
>>         cases (both compile- and run-time dependencies).
>>
>>         Saving output in log file: hp-check.log
>>
>>         Initializing. Please wait...
>>
>>         ---------------
>>         | SYSTEM INFO |
>>         ---------------
>>
>>         Basic system information:
>>         Linux tiozzo-System-Product-Name 3.2.0-39-generic #62-Ubuntu
>>         SMP Thu Feb 28 00:28:53 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
>>
>>         Distribution:
>>         ubuntu 12.04
>>
>>         Checking Python version...
>>         OK, version 2.7.3 installed
>>
>>         Checking PyQt 4.x version...
>>         OK, version 4.9.1 installed.
>>
>>         Checking for CUPS...
>>         Status: scheduler is running
>>         warning: Version: (cups-config) Not available. Unable to
>>         determine installed version of CUPS.)
>>         error_log is set to level: warn
>>
>>         Checking for dbus/python-dbus...
>>         dbus daemon is running.
>>         python-dbus version: 1.0.0
>>
>>
>>         ------------------------------------
>>         | COMPILE AND RUNTIME DEPENDENCIES |
>>         ------------------------------------
>>
>>         note: To check for compile-time only dependencies, re-run
>>         hp-check with the -c parameter (ie, hp-check -c).
>>         note: To check for run-time only dependencies, re-run
>>         hp-check with the -r parameter (ie, hp-check -r).
>>
>>         Checking for dependency: CUPS - Common Unix Printing System...
>>         OK, found.
>>
>>         Checking for dependency: CUPS DDK - CUPS driver development
>>         kit...
>>         warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY
>>         dependency. Some HPLIP functionality may not function properly.
>>
>>         Checking for dependency: CUPS devel- Common Unix Printing
>>         System development files...
>>         error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY
>>         dependency. Please make sure that this dependency is
>>         installed before installing or running HPLIP.
>>
>>         Checking for dependency: CUPS image - CUPS image development
>>         files...
>>         error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY
>>         dependency. Please make sure that this dependency is
>>         installed before installing or running HPLIP.
>>
>>         Checking for dependency: DBus - Message bus system...
>>         error: NOT FOUND! This is a REQUIRED dependency. Please make
>>         sure that this dependency is installed before installing or
>>         running HPLIP.
>>
>>         Checking for dependency: gcc - GNU Project C and C++ Compiler...
>>         error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY
>>         dependency. Please make sure that this dependency is
>>         installed before installing or running HPLIP.
>>
>>         Checking for dependency: GhostScript - PostScript and PDF
>>         language interpreter and previewer...
>>         OK, found.
>>
>>         Checking for dependency: libcrypto - OpenSSL cryptographic
>>         library...
>>         error: NOT FOUND! This is a REQUIRED dependency. Please make
>>         sure that this dependency is installed before installing or
>>         running HPLIP.
>>
>>         Checking for dependency: libjpeg - JPEG library...
>>         error: NOT FOUND! This is a REQUIRED dependency. Please make
>>         sure that this dependency is installed before installing or
>>         running HPLIP.
>>
>>         Checking for dependency: libnetsnmp-devel - SNMP networking
>>         library development files...
>>         error: NOT FOUND! This is a REQUIRED dependency. Please make
>>         sure that this dependency is installed before installing or
>>         running HPLIP.
>>
>>         Checking for dependency: libpthread - POSIX threads library...
>>         OK, found.
>>
>>         Checking for dependency: libtool - Library building support
>>         services...
>>         error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY
>>         dependency. Please make sure that this dependency is
>>         installed before installing or running HPLIP.
>>
>>         Checking for dependency: libusb - USB library...
>>         error: NOT FOUND! This is a REQUIRED dependency. Please make
>>         sure that this dependency is installed before installing or
>>         running HPLIP.
>>
>>         Checking for dependency: make - GNU make utility to maintain
>>         groups of programs...
>>         OK, found.
>>
>>         Checking for dependency: PIL - Python Imaging Library
>>         (required for commandline scanning with hp-scan)...
>>         OK, found.
>>
>>         Checking for dependency: PolicyKit - Administrative policy
>>         framework...
>>         OK, found.
>>
>>         Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
>>         OK, found.
>>
>>         Checking for dependency: Python DBus - Python bindings for
>>         DBus...
>>         OK, found.
>>
>>         Checking for dependency: Python devel - Python development
>>         files...
>>         error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY
>>         dependency. Please make sure that this dependency is
>>         installed before installing or running HPLIP.
>>
>>         Checking for dependency: Python libnotify - Python bindings
>>         for the libnotify Desktop notifications...
>>         OK, found.
>>
>>         Checking for dependency: Python XML libraries...
>>         OK, found.
>>
>>         Checking for dependency: Python 2.3 or greater - Required for
>>         fax functionality...
>>         OK, found.
>>
>>         Checking for dependency: Python 2.2 or greater - Python
>>         programming language...
>>         OK, found.
>>
>>         Checking for dependency: Reportlab - PDF library for Python...
>>         OK, found.
>>
>>         Checking for dependency: SANE - Scanning library...
>>         OK, found.
>>
>>         Checking for dependency: SANE - Scanning library development
>>         files...
>>         error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY
>>         dependency. Please make sure that this dependency is
>>         installed before installing or running HPLIP.
>>
>>         Checking for dependency: scanimage - Shell scanning program...
>>         OK, found.
>>
>>         Checking for dependency: xsane - Graphical scanner frontend
>>         for SANE...
>>         OK, found.
>>
>>
>>         ----------------------
>>         | HPLIP INSTALLATION |
>>         ----------------------
>>
>>
>>         Currently installed HPLIP version...
>>         HPLIP 3.12.2 currently installed in '/usr/share/hplip'.
>>
>>         Current contents of '/etc/hp/hplip.conf' file:
>>         # hplip.conf.  Generated from hplip.conf.in
>>         <http://hplip.conf.in> by configure.
>>
>>         [hplip]
>>         version=3.12.2
>>
>>         [dirs]
>>         home=/usr/share/hplip
>>         run=/var/run
>>         ppd=/usr/share/ppd/hplip/HP
>>         ppdbase=/usr/share/ppd/hplip
>>         doc=/usr/share/doc/hplip-doc/HTML
>>         icon=no
>>         cupsbackend=/usr/lib/cups/backend
>>         cupsfilter=/usr/lib/cups/filter
>>         drv=/usr/share/cups/drv
>>
>>         # Following values are determined at configure time and
>>         cannot be changed.
>>         [configure]
>>         network-build=yes
>>         pp-build=yes
>>         gui-build=yes
>>         scanner-build=yes
>>         fax-build=yes
>>         dbus-build=yes
>>         cups11-build=no
>>         doc-build=yes
>>         shadow-build=no
>>         hpijs-install=yes
>>         foomatic-drv-install=yes
>>         foomatic-ppd-install=yes
>>         foomatic-rip-hplip-install=no
>>         hpcups-install=yes
>>         cups-drv-install=yes
>>         cups-ppd-install=no
>>         internal-tag=3.12.2
>>         restricted-build=no
>>         ui-toolkit=qt4
>>         qt3=no
>>         qt4=yes
>>         policy-kit=yes
>>         hpijs-only-build=no
>>         lite-build=no
>>         udev-acl-rules=yes
>>         hpcups-only-build=no
>>         hpijs-only-build=no
>>
>>
>>         Current contents of '/var/lib/hp/hplip.state' file:
>>         # hplip.state - HPLIP runtime persistent variables.
>>
>>         [plugin]
>>         installed=0
>>         eula=0
>>
>>
>>
>>         Current contents of '~/.hplip/hplip.conf' file:
>>         [settings]
>>         systray_visible = 0
>>         systray_messages = 0
>>
>>         [last_used]
>>         device_uri =
>>         printer_name =
>>         working_dir = .
>>
>>         [commands]
>>         scan = /usr/bin/simple-scan %SANE_URI%
>>
>>         [refresh]
>>         rate = 30
>>         enable = false
>>         type = 1
>>
>>         [polling]
>>         enable = false
>>         interval = 5
>>         device_list =
>>
>>         [fax]
>>         voice_phone =
>>         email_address =
>>
>>         [installation]
>>         date_time = 22/03/2013 19:01:56
>>         version = 3.12.2
>>
>>
>>
>>         --------------------------
>>         | DISCOVERED USB DEVICES |
>>         --------------------------
>>
>>         No devices found.
>>
>>         ---------------------------------
>>         | INSTALLED CUPS PRINTER QUEUES |
>>         ---------------------------------
>>
>>
>>         HP_Deskjet_2510_series
>>         ----------------------
>>         Type: Unknown
>>         Device URI:
>>         usb://HP/Deskjet%202510%20series?serial=CN26822J4F05QX&interface=1
>>         PPD: /etc/cups/ppd/HP_Deskjet_2510_series.ppd
>>         PPD Description: HP Deskjet 2050 j510 Series hpijs, 3.12.2
>>         Printer status: printer HP_Deskjet_2510_series is idle.
>>          enabled since ven 22 mar 2013 17:15:41 CET
>>         warning: Printer is not HPLIP installed. Printers must use
>>         the hp: or hpfax: CUPS backend to function in HPLIP.
>>
>>
>>         ----------------------
>>         | SANE CONFIGURATION |
>>         ----------------------
>>
>>         'hpaio' in '/etc/sane.d/dll.conf'...
>>         'hpaio' in '/etc/sane.d/dll.d/hplip'...
>>         OK, found. SANE backend 'hpaio' is properly set up.
>>
>>         Checking output of 'scanimage -L'...
>>
>>         No scanners were identified. If you were expecting something
>>         different,
>>         check that the scanner is plugged in, turned on and detected
>>         by the
>>         sane-find-scanner tool (if appropriate). Please read the
>>         documentation
>>         which came with this software (README, FAQ, manpages).
>>
>>
>>         ---------------------
>>         | PYTHON EXTENSIONS |
>>         ---------------------
>>
>>         Checking 'cupsext' CUPS extension...
>>         OK, found.
>>
>>         Checking 'pcardext' Photocard extension...
>>         OK, found.
>>
>>         Checking 'hpmudext' I/O extension...
>>         OK, found.
>>
>>         Checking 'scanext' SANE scanning extension...
>>         OK, found.
>>
>>
>>
>>         -----------------
>>         | USB I/O SETUP |
>>         -----------------
>>
>>         Checking for permissions of USB attached printers...
>>
>>         HP Device 0xac11 at 001:003:
>>             Device URI: hp:/usb/Deskjet_2510_series?serial=CN26822J4F05QX
>>         error: Unsupported model: Deskjet_2510_series
>>
>>         ---------------
>>         | USER GROUPS |
>>         ---------------
>>
>>         tiozzo adm cdrom sudo dip plugdev lpadmin sambashare
>>
>>         error: User needs to be member of group 'lp' to enable print,
>>         scan & fax.
>>         User member of group 'lpadmin'.
>>
>>         -----------
>>         | SUMMARY |
>>         -----------
>>
>>         error: 13 errors and/or warnings.
>>
>>         Please refer to the installation instructions at:
>>         http://hplip.sourceforge.net/install/index.html
>>
>>
>>         Done.
>>
>>
>>         -- 
>>         Ai sensi del D.Lgs. 196/2003 -"Codice in materia di
>>         protezione dei dati personali" Si precisa che le informazioni
>>         contenute in questo messaggio e negli eventuali allegati sono
>>         esclusivamente e strettamente riservate al destinatario.
>>         Persone diverse dallo stesso non possono copiare,distribuire
>>         o divulgare di quanto in esso contenuto a terzi (art. 616 c.p.)
>>         Chiunque riceva questo messaggio per errore, è pregato di
>>         distruggerlo e di informare immediatamente il mittente di
>>         questa email !
>>
>>         _______________________________________________
>>         fsug-pd mailing list
>>         fsug-pd a lists.fsugpadova.org
>>         <mailto:fsug-pd a lists.fsugpadova.org>
>>         http://lists.fsugpadova.org/listinfo/fsug-pd
>>
>>
>>
>>     _______________________________________________
>>     fsug-pd mailing list
>>     fsug-pd a lists.fsugpadova.org  <mailto:fsug-pd a lists.fsugpadova.org>
>>     http://lists.fsugpadova.org/listinfo/fsug-pd
>
>
>     -- 
>     Ai sensi del D.Lgs. 196/2003 -"Codice in materia di protezione dei dati personali" Si precisa che le informazioni contenute in questo messaggio e negli eventuali allegati sono esclusivamente e strettamente riservate al destinatario.
>     Persone diverse dallo stesso non possono copiare,distribuire o divulgare di quanto in esso contenuto a terzi (art. 616 c.p.)
>     Chiunque riceva questo messaggio per errore, è pregato di distruggerlo e di informare immediatamente il mittente di questa email !
>
>
>     _______________________________________________
>     fsug-pd mailing list
>     fsug-pd a lists.fsugpadova.org <mailto:fsug-pd a lists.fsugpadova.org>
>     http://lists.fsugpadova.org/listinfo/fsug-pd
>
>
>
>
> _______________________________________________
> fsug-pd mailing list
> fsug-pd a lists.fsugpadova.org
> http://lists.fsugpadova.org/listinfo/fsug-pd


-- 
Ai sensi del D.Lgs. 196/2003 -"Codice in materia di protezione dei dati personali" Si precisa che le informazioni contenute in questo messaggio e negli eventuali allegati sono esclusivamente e strettamente riservate al destinatario.
Persone diverse dallo stesso non possono copiare,distribuire o divulgare di quanto in esso contenuto a terzi (art. 616 c.p.)
Chiunque riceva questo messaggio per errore, è pregato di distruggerlo e di informare immediatamente il mittente di questa email !

-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://lists.fsugpadova.org/pipermail/fsug-pd/attachments/20130323/b8d5b2c9/attachment.htm>


Maggiori informazioni sulla lista fsug-pd